Kilns Cooling Energy Efficiency Forced Draught Centrifugal Blower Flow Fan
Introduction
The 7-07 series high-pressure centrifugal flow fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments.
Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas desulfurization, flue gas denitration, industrial boiler forced draft and induced draft fan, the material conveying of the various back kiln & calcining kiln, the induced draft of the smelting furnace and the casting furnace, combustion of blast furnace, coal injection of blast furnace, pressurized transportation of gas, etc.
Kilns Cooling Energy Efficiency Forced Draught Centrifugal Blower Flow Fan is widely used in the cement industry, building materials industry, environmental protection industry, metallurgical industry, power industry projects such as large-scale dust collector, industrial boilers, ventilation systems, cooling.
Technical data
| PRODUCT PARAMETERS |
| Centrifugal Blower Flow Fan Application | Temperature | Normal temperature air, Hot air |
| Air composition | Clean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials |
| Centrifugal Blower Flow Fan Performance | Impeller diameter | 500-3000 | mm |
| Speed of mainshaft | ≤3000 | rpm |
| Pressure range | 451-27519 | Pa |
| Flow range | 173-100788 | m3/h |
| Centrifugal Blower Flow Fan Structure | Blade | Backward |
| Impeller support | SWSI (Single Width, Single Inlet), Impeller overhung. |
| Drivetrain | V-Belt | Can assign |
| Lubrication | Oil bath lubrication |
| Bearing cooling | Air cooling, Water cooling, Oil cooling |
| Centrifugal Blower Flow Fan System
Configuration | Motor | ABB, SIEMENS, WEG, TECO, SIMO, Chinese brand… | Can assign |
| Impeller | Q235, Q345, SS304, SS316, HG785, DB685... |
| Casing, Air inlet cone, Air inlet damper | Q235, Q345, SS304, SS316, HG785, DB685... |
| Main shaft | 45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel... |
| Bearing | FAG, SKF, NSK, ZWZ… |
| Centrifugal Blower Flow Fan Optional
Components | System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator,
Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,System monitoring Instrument, Lube system, Overhead lube tank etc |
Advantages and Features
1. Centrifugal Blower Flow Fan can output high out gas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered.
2. Compact shape, saving space.
3. In the use of common base, the installation is very simple and requires little support from a professional technician.
4. Made of high quality carbon steel, Stainless steel or other metal materials can also be used according to user requirements.
5. For dusty gases, we are able to satisfy a wide range of conditions from a small amount of dust to a very high dust content, after special treatment, the surface hardness of the blade can reach HRC60~70, which can extend the life of the impeller more than 3 times.
6. Centrifugal Blower Flow Fan parts are tightly matched and the sealing performance is good, ensuring that the output pressure will not decrease.
7. By ultrasonic flaw detection for the impeller welding line and main shaft, ensure that there are no weld defects and material defects to ensure strength.
8.Centrifugal Blower Flow Fan impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan.
9.After the completion of production, after running test and vibration value detection, reliable operation.
Product Tags:
|
|
Kilns Cooling Forced Draught Fan Industrial Centrifugal Blower Fan Images
|
