Coupling Driven Air Purification Middle Pressure Centrifugal Venlation Fans
Introduction
This centrifugal fan is specially designed for dust exhaustion jointly designed by the fan industry. This series of fans has the characteristics of not easy to accumulate dust and wear resistance, and has the characteristics of high efficiency and low noise. It is a centrifugal fan product series with a wide performance range.According to fan parameters you need, SIMO can make centrifugal blower fan technical solution for you. Below fan picture for your reference.
Application
It is suitable for discharging gas containing dust, wood scraps, fine broken fibers, etc. If there are hard particles, a dust removal device must be added in front of the fan, and it can also be used for general ventilation.
Technical data
| Centrifugal Venlation Series | Centrifugal Venlation Model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m3/h) | Power
(kW) |
| 6-12 | 8D | 1450 | 1859～2745 | 11000～26400 | 15 ~ 22 |
| 9D | 1450 | 2353～3474 | 15700～37500 | 30 ~ 45 |
| 10D | 1450 | 2905～4289 | 21500～51500 | 45 ~ 75 |
| 11D | 960 ~ 1450 | 1541～5190 | 22700～68500 | 22 ~ 110 |
| 12D | 960 ~ 1450 | 1834～6176 | 24600～89000 | 37 ~ 160 |
Advantages and Features
1. According to customer performance requirements customized design, and optimized by CFD technology, the energy consumption is lower than similar models.
2. The blade placement angle is optimized, more wear-resistant and longer service life.
3. The variable inlet damper can be used to flexibly adjust the pressure and flow of the fan during operation. The variable frequency motor can also be selected to adjust the pressure and flow of the fan by changing the speed.
4. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device.
5. Made of high quality carbon steel, stainless steel or other metal materials are available upon request.
6. Ultrasonic flaw detection on the welding seam and main spindle of the impeller to ensure that there are no welding defects or material defects and ensure the strength.
7. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance.
For extremely high temperature operating conditions, can also be installed with an electronic cooler, absolute protection of the reliable operation of the fan system.
8. Large parts and components are disassembled and transported, so that most parts can be loaded into containers for transportation, saving you shipping costs.
9. Each component has an installation number. Under the guidance of the installation manual, the system assembly can be completed smoothly.
10. Provide on-site arrangement and guidance services.
Product Tags:
|
|
Middle Pressure Centrifugal Ventilation Fans Coupling Driven Air Purification Images
|
